Today’s energy conscious climate has motivated many to do what they can to become more efficient and conserve energy and money. Unfortunately this same climate has prompted others to take advantage of unsuspecting consumers’ wishes to save energy and reduce expenses.

Companies that tout power factor improvement (kVAR correction) and transient voltage suppression are a good example of this bad trend. Lately we are seeing more and more of these companies cropping up and feel it is time to set the record straight.

First, transient voltage surge suppression (TVSS) plays a valuable role in improving power quality to protect sensitive equipment inside a facility. However, TVSS does not save energy. TVSS’s are only active a tiny fraction of a second to protect against voltage surges which only last for less than a millisecond. To actually reduce energy consumption the TVSS would need to actually cut power consumption for an extended period of time which is not what they are designed to do. Again, TVSS is important to protect sensitive electrical equipment but buyers should avoid vendors promising, or even guaranteeing, that they will reduce energy consumption.

Now what about vendors who claim that improving power factor will save 15% or 20% or 30% of energy consumption and corresponding cost? This one is a little trickier.

For residential applications, power factor does nothing to save energy because the typical home already has an average power factor of about 0.97 which is almost the perfect power factor of 1 or unity. In addition, the device (called a capacitor) is placed at the main circuit breaker. According to IEEE 5.5.3.3 capacitors must be situated at or near the respective inductive loads to reduce power system losses by reducing heat and distribution losses known as I2R losses.

So what about commercial and industrial facilities using power factor correction to reduce energy costs? It is perfectly appropriate for a company that is incurring penalties or a kVA billing structure from the utility company to improve the facility’s overall power factor by employing a capacitor bank at the main service entrance or individual capacitors at or near the respective motor loads. Doing so will eliminate the power factor penalties and/or reduce the kVA demand charges on the utility bill which can save significant money and provide a significant ROI on the investment.

But what about power factor correction reducing kWh consumption? IEEE also tells us that I2R losses only account for 2 to 5% of the total load in a facility. Simple math tells us that it would be against the laws of physics to get the 15% to 30% energy reduction claimed by some vendors. Think about it. Even if your facility had 5% distribution losses and you could correct 100% of the problem via power factor correction at every load (which can’t be done) you would still only save 5% at the most. No where near the claims of some capacitor vendors and manufacturers.

All that said, power factor correction when done properly will eliminate utility penalties and kVA demand charges, improve facility power quality, increase electrical system capacity, and save a little energy when applied to the appropriate motor loads.

So make an investment in transient voltage surge suppression and power factor correction when appropriate and necessary. But caveat emptor!

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.

To pass at the MCSA level you need to pass 4 Microsoft Certified Professional exams (MCP’s). If this is your first entry into computing exams, it’s likely you’ll be required to learn a few things prior to tackling the first of the four MCP’s. Look for a company that has a team of advisors who can help you sort out the ideal program for you and who will get you started in the right place.

Massive developments are coming via technology in the near future – and it becomes more and more thrilling each day.

Computer technology and interaction through the web will noticeably change our lives in the future; profoundly so.

The average IT technician in Great Britain can demonstrate that they earn a lot more than his or her counterpart in another industry. Average wages are amongst the highest in the country.

As the IT industry keeps increasing nationally and internationally, it’s predictable that the need for certified IT professionals will continue actively for the significant future.

It’s essential to have an authorised exam preparation system included in your course.

Because most IT examining boards are from the USA, you need to become familiar with their phraseology. It’s no use merely answering any old technical questions – they need to be in the proper exam format.

Ensure that you check how much you know by doing quizzes and practice exams before you take the real deal.

Trainees looking at this market are usually quite practically-minded, and aren’t really suited to the classroom environment, and struggling through thick study-volumes. If you identify with this, use multimedia, interactive learning, with on-screen demonstrations and labs.

Long-term memory is enhanced when we use multiple senses – experts have been clear on this for years now.

Top of the range study programs now offer interactive CD and DVD ROM’s. Real-world classes from the instructors will mean you’ll find things easier to remember via their teaching and demonstrations. Then it’s time to test your knowledge by using practice-lab’s.

It’s imperative to see the type of training provided by your chosen company. Be sure that they contain full motion videos of instructors demonstrating the topic with lab’s to practice the skills in.

Avoid training that is purely online. You want physical CD/DVD ROM course materials where obtainable, so that you have access at all times – ISP quality varies, so you don’t want to be totally reliant on a quality and continuous internet connection.

Most of us would love to think that our jobs are safe and the future is protected, but the likely scenario for most jobs around the UK today seems to be that the marketplace is far from secure.

We can however discover market-level security, by searching for high demand areas, together with work-skill shortages.

A rather worrying UK e-Skills study showed that over 26 percent of all available IT positions are unfilled mainly due to a huge deficit of appropriately certified professionals. So, out of each 4 positions available across IT, employers are only able to find trained staff for three of them.

Achieving in-depth commercial IT accreditation is consequently a quick route to achieve a life-long as well as satisfying occupation.

In reality, acquiring professional IT skills over the coming years is likely the best career move you’ll ever make.

(C) Jason Kendall. Browse LearningLolly.com for in-depth information. MCSA 2008 Certification or MCSA Courses.

Banks don’t have your company’s best interest in mind as they are hardly even staying afloat in this economy. Today’s institutional financier isn’t qualified to run a bath let alone a bank. Don’t put your future in the untested hands of a 20 something knucklehead. After you’ve tossed all that useless info in the trash, clear your head and then look at your company and ask yourself a few tough questions: Is your company invest-able? Do you and your executive staff have a pedigree that investors deem as seasoned enough to take their money and make affective use of it and not lose it? What proprietary concepts/technology/patents do you have that give you a larger market share with the proper cash infusion? What is your current capital/debt situation?

If, after pondering these questions you’ve come to the conclusion you honestly, truly have something worth pursuing then the next step is to look at the reality that your company is worthy of a public offering. Stay away from Pink Sheets and be weary of reverse mergers and in reality your company won’t qualify for the NASDAQ so the quickest way to raise public capital is the OTCBB (over the counter bulletin boards).

OTCBB is an SEC regulated platform that has a solid investor following and market makers that can effectively promote your stock to rapidly raise capital. Don’t let these difficult economic times steal your dreams of corporate prosperity and personal growth.

If you have a solid business concept, there is a way to fund it. Look into the OTCBB, it’s your best bet for an inexpensive public offering with a direct path to long term funding.

Go Public With Your Company, call Princeton Corporate Solutions at 267-233-0183Take Your Company Public the easy way!

A good pair of sport headphones is an important part of working out, particularly if you like to run or are playing a sport with a lot of movement. The headphones that come with your iPod or mp3 player do not provide the best fit and they can move when you are exercising. They also may not be sweat resistance and the sound quality is not high. If you are going to the gym you will need a pair of sports headphones.

A decent set of sport headphones is the Nike Aero Sport headphones. These headphones will stay put during any activity, are easy to clean and are sweat proof. However, one criticism is that with prolonged used, these headphones don’t produce the best music and can be a little uncomfortable as they are made of plastic. The cord will also stay out of your way as it easily stays behind your arms. If you are looking for an inexpensive pair of sport headphones that will last then these is a good choice.

The Sennheiser MX85 is one of the top rated sports headphones for joggers. The fit is more comfortable than most, especially for people with smaller ears. These come with different pieces to adjust the size to fit almost anyone. These are highly sweat resistant and don’t fall out as readily as other earbuds.

An affordable pair of sport headphones is the Sony MDR-AS50G. The price is very reasonable and the headphones produce good quality sound. The cable is well placed behind the neck though these sport headphones can stick out from your head and not be concealed by your hair. These headphones fit so well that you do not need the band to loop over the ears for the headphones to stay in place and they are very comfortable to wear.

The jaybird JB-100 sport headphones are blue tooth headphones. These are excellent sports headphones and unlike many bluetooth devices they do not drop out. These ear buds stay in place using over the ear mounts and they stay in place very well. These type of sports headphones can be pricey as there is not a huge selection of blue tooth headphones so they can be pricey. The sound levels can be iffy as the bass control is not the best. If you want blue tooth sports headphones then these are an excellent choice.

A well designed sport headphones is available from Arriva. The cord wraps around the head and stays out of the way while the ear buds stay in place. The ear buds are quite comfortable and the sound quality is good but if you want superior sound quality then you should try some of their higher models as the sound quality is just okay in the lower price ranges.

Check out today’s discount on sennheiser sport headphones or even take a peek at the deals you can get on headphones with inline volume control.

You certainly don’t have to be a rocket scientist to be able to design a website. Anyone with reasonable intelligence and access to a computer and the Internet can develop their own website in a few days without having to learn a line of code.

One of your very first decisions will be whether you want to register a domain name for your website (like microsoft.com) or whether you are going to use a free host and use the long website address that is normally involved with such an option. If the website will be for your business you should not give the free host option much thought. A business needs its own domain name for many reasons, not least of which is brand building.

Even if the website will only be for an organization or club it is still better to have its own domain name. The only circumstance where you could go for the free hosting/long URL option is when you will simply use the website to upload pictures of your recent holiday or for other private purposes.

Next get yourself a good WYSIWYG website editor. You can download numerous good editors free from the Internet. Many highly professional packages come with a scaled down free version that is totally sufficient for a newbie designer. Before you download one, read up what other people say about it. You have to be sure it can handle all the basic thing like forms, style sheets and tables. And it should create good, clear html code.

With a visual editor you don’t have to learn any HTML code (although it will do no harm if you do). When most of them are started, you will see a quite familiar interface that looks much like a normal word processing program. You can type, you can insert pictures, you can make text bold and big or small and italic.

Do some research on what makes for good page layout. Especially if this will be a business website, it is important where you place things on the page. It is also important which colors you use on which type of background. On a business website don’t use large fonts and exclamation marks a lot – it looks unprofessional.

Another important aspect is adding the right meta tags. These tags can’t seen by your website visitors, but the search directories (such as Yahoo) and search engines (e. G. Google) use them to decide where and in which category to list your website. You can insert title tags, description tags and keywords easily with most visual editors without knowing any code.

You will also have to decide where to host your website. Although there are a large number of free hosting companies, the majority of them will display ads of some sort on your pages, so if this is a business or club website, do not even consider it. There are enough good, cheap web hosts around.

Then download a free FTP program (there are many) from the Internet and use it to upload your files to the web server of your hosting company.

To design your own website might only be the start of a lucrative new part-time business. If you like it and you are good at it, you might even one day become a full-time web designer.

In order to be like those website makers and want to acquire how to design your own website, you can acquire more information through these websites. For some tips to make money designing websites, you will also find them in these websites.

You might also want to be given advice on the types of jobs that are available once you have passed your exams, and the type of individual those jobs could suit. Many people like to get advice on what the best route is for them.

Courses should be customised to suit your current level of knowledge and ability. Consequently, having got to grips with the most appropriate area of work for you, your next requirement is the relevant route that will equip you for the role.

One useful service that several companies offer is a Job Placement Assistance program. This is to assist your search for your first position. With the growing skills shortage in the United Kingdom today, it’s not necessary to make too much of this option though. It’s not as difficult as you may be led to believe to land employment once you’re properly qualified.

Help with your CV and interview techniques might be provided (if not, see one of our sites for help). Ensure you work on your old CV straight away – not after you’ve qualified!

Getting your CV considered is better than being rejected. A decent number of junior positions are offered to people who are still at an early stage in their studies.

You’ll normally experience better performance from an independent and specialised local recruitment consultancy than you will through a training company’s employment division, because they’ll know the local area and commercial needs better.

Just be sure that you don’t invest a great deal of time on your training course, then call a halt and expect somebody else to sort out your employment. Get off your backside and get on with the job. Invest the same focus into landing the right position as it took to get qualified.

Some training companies will only offer basic 9am till 6pm support (maybe a little earlier or later on certain days); very few go late in the evening or at weekends.

Don’t buy study programmes that only provide support to you via a call-centre messaging service when it’s outside of usual working hours. Colleges will defend this with all kinds of excuses. The bottom line is – you want support at the appropriate time – not as-and-when it’s suitable for their staff.

Keep your eyes open for colleges that use several support centres around the globe in several time-zones. These should be integrated to offer a simple interface as well as 24×7 access, when you want it, with no hassle.

Look for a training provider that is worth purchasing from. As only live 24×7 round-the-clock support gives you the confidence to make it.

Beginning from the viewpoint that we have to home-in on the area of most interest first, before we can even mull over which training program fulfils our needs, how are we supposed to find the way that suits us?

I mean, if you don’t have any know-how of IT in the workplace, how can you expect to know what someone in a particular field fills their day with? Let alone decide on what educational path would be most appropriate for ultimate success.

Usually, the way to come at this issue appropriately flows from an in-depth conversation around several areas:

* Your hobbies and interests – these can highlight what things you’ll get the most enjoyment out of.

* Do you hope to achieve a specific dream – like working for yourself sometime soon?

* How highly do you rate salary – is an increase your main motivator, or is day-to-day enjoyment higher up on your list of priorities?

* Learning what the normal IT areas and sectors are – and what makes them different.

* It makes sense to understand what differentiates the myriad of training options.

To cut through all the jargon and confusion, and discover the most viable option for your success, have an informal chat with an industry expert and advisor; an individual that understands the commercial reality whilst covering the certifications.

You should remember: a actual training or an accreditation is not the ultimate goal; a job that you want is. Many trainers unfortunately put too much weight in the actual accreditation.

Students often train for a single year but end up performing the job-role for decades. Ensure you avoid the fatal error of taking what may be an ‘interesting’ training program and then spend decades in a job you don’t like!

Never let your focus stray from where you want to get to, and formulate your training based on that – avoid getting them back-to-front. Keep your eyes on your goals and begin studying for a career that will keep you happy for many years.

Obtain help from an industry professional who ‘gets’ the commercial realities of the area you’re interested in, and who can give you ‘A typical day in the life of’ outline of of what you’ll be doing day-to-day. It makes good sense to discover if this is the right course of action for you well before you embark on your training program. There’s really no point in beginning your training only to realise you’ve made a huge mistake.

(C) 2009. Check out LearningLolly.com for great info on AutoCAD Mechanical 2008 and AutoCAD Mechanical 2008 Training.

Even though Windows has done an excellent job of making the personal computer easy to use, knowing a few keyboard shortcuts can increase your productivity and enjoyment of windows software. Although there are many shortcut keys that can be used in Windows, memorizing and using a few of them can save you a lot of time.

The F keys located at the top of the keyboard are often ignored by most computer users. In previous operating systems, the keys were extremely important, and handled most of the basic functions. Nowadays, most of their functionality has been replaced with other shortcut keys. There are a few original Function keys that are still applicable in today’s Windows such as the very useful F1 key for help.

The CTRL keys are often forgotten about keys that have lots of usefulness. Abbreviated for the word ‘control’, these keys work with other keys to launch popular functions. CTRL key functions are straightforward and easy to use. Fore example, you can save a lot of clicks by using CTRL+C to copy an item to the clipboard, and then CTRL+V to paste it somewhere else.

The Alt keys are also helpful little shortcut keys when working in Windows. Unlike the CTRL keys, Alt keys are partnered with other function or non letter keys. One easy to remember example is using Alt+Tab to switch between windows whether than clicking with a mouse. Alt+F4 is a quick and easy way to close the current window that you are in. (You know instead of clicking that pesky X) My favorite Alt combination is CTRL+Alt+Delete to launch the task manager and close unresponsive programs.

In addition to the shortcut keys already on the keyboard, Windows has its own shortcut key which it simply calls the Windows key. By itself the windows key will launch the start menu. When combined with other keys it has even more functionality. One simple to remember example is Windows+D to minimize open windows to show the desktop.

Thanks to Windows, using a computer is a lot easier than it used to be. No longer do we have to remember commands, or have a cheat sheet next to the computer. We can simply use the mouse and click whatever it is we want to do. However, to get the most out of windows, and possibly save a little time, it doesn’t hurt to take a few shortcuts.

Andrew Johnson is an expert in computer consumables. If you would like further information about varieties of windows software or are looking for a trusted computer retailer please visit http://www.ebuyer.com

For anyone that wants to build their social bookmarks it is necessary to become a part of social bookmarking sites that in turn allow you to save different bookmarks and also add keyword tags which you can choose according to your needs. Next, you can make your bookmarks private or public – depending on how you wish to share the bookmarks.

The entire social bookmark concept began quite recently and it started out with sites such as Simpy and also with del-icio.us. Once these sites succeeded it did not take long before other sites opened up and soon it became a mini-revolution. Such sites help users to collect resources which can be shared further.

Sites that offer social bookmarks have now broadened the horizons and it has helped to better organize information and it can help users to categorize various resources in a more effective manner. All users need to do is to save their links to any Webpage which are required for use at a later time.

In most cases the bookmarks are public though you have the option of saving them privately in which case you can share these bookmarks with certain people or groups of persons and they can shared within a network or even as combination of domains – both private and public.

It is normal practice for a social bookmark site to encourage their users to do the organizing of their bookmarks through use of tags (informally used) and not in the typical browser oriented systems of different folders.

There no doubts the fact that a social bookmarking site works much better than software programs that handle resource locations and even software that classify information – examples of which are search engine spiders.

The only trouble is that till date there is lack of any standards for the way you can create keywords and even tagging is not standardized. It is also easy to tag things wrongly which in most cases occur because of making spelling errors and tags can have numerous meanings which means lack of confusion and also lack of proper clarity.

Who doesn’t like to have bookmarks? It’s nice to have your favorite sites neatly in one place so we can view them quickly and easily. But did you know you can share your bookmarks on a social bookmarking site? Find out about this exciting new trend!

With a cell phone, you do not need to pick up a call to find out who is calling. Some of time, you may not know who the caller is if he does has not told you before. The caller may choose to remain unknown to you if he so chooses. Before the Internet becomes accessible to all, only the policemen or private eyes are able to track the mysterious caller. Now, you can have the investigative skills of a detective. Read on to find out why that is so.

To trace cell phone numbers, log in to a trace cell phone numbers website. The power to gain access to any cell phone numbers is in your hand now. Do not be intimidated by your lack of technical skills as the interface is easy to navigate. If you have done a search on any search engine like Bing, chances are you are able to conduct a search properly. It is really that simple. First, log in the websites to trace cell phone numbers and then enter the one you want to search for. You only need to wait for a few moments before the system generates the full report for your reference.

This service is not free as the service company has to fork out a lot of money to maintain these vast databases of information. You may feel that the fee is redundant but the free websites only provides you with landline number lookup. Besides that fact that the price to the search is low, you also get the peace of mind of knowing you will get the best results. As a member, you will be able to conduct searches for one whole year. If you are hesitant to join, you can first test to see if their database is comprehensive.

You may be thinking of saving the membership fee and attempt to look for a free way to trace cell phone number. It is possible to do so provided that you know someone inside the cellular phone company. If that person is willing to help you, then you do not need to pay for anything. Another way you can try is to Google the number. Some of the caller is very careless and may leave their cell phone number on the social sites like Facebook or My Space.

The ability to trace cell phone number is becoming more popular with folks now. With a single search, you can start tracing your old classmates or us the information to stop pranksters in their tracks. At the same time, you are able to maintain confidentiality of your search. Now you can access the secrets of a detective at your own home with the trace cell phone number website.

There is only one cell phone number trace website that gives absolute reliability and completeness in terms of search online. Check out why thousands are relying on this site to trace cell phone number now!

As you have probably figured out, we are speaking of a laser cutter. A laser cutter is likely to be one of the most wide-spread tools found in fabric industries as well as in so many other industries.

The most common item such as a household beam that holds up the foundations of a home is given a smooth finish with a laser cutter around the edges and the sides. Stones and metals are engraved upon with precision computer-programmed laser cutters as well.

In fact, so many things around us are finished off with laser cutters. We are affected by laser cutters in so many ways, and we don’t even realize it.

We need to understand the recent shift in people who instead of using traditional methods of cutting such as welding and other mechanical forms of cutting mainly depend on laser cutters.

There are quite a few advantages of laser cutting over mechanical cutting. However we can name three. Firstly, it is important to note that when cutting with a laser, there is a lack of physical contact between the human and the object.

This makes a difference with regards to contamination. Because there is no cutting edge in laser cutting, nothing can contaminate the material, and for that matter, the material cannot contaminate it either.

There is also a much lower possibility of warping the material being cut because laser cutters have a much lower heat-affected zone. Clearly, another benefit to laser cutting is the ease and precision that one can achieve when cutting items that with traditional methods might have taken hours and still not come out so good.

It is true that laser cutting does require a high level of energy. However, the benefits of laser cutting have proven to be worth spending on a little extra energy.

Whitaker Perrets is a professional laser cutter who specializes in material and metal cutting. To learn more about the benefits of laser cutters and engraving machines check out Jamieson Lasers online. Whitaker is an SEO specialist at SEO services group ClickResponse.